Designed for the camera
- Lidded reveal that reads clearly in a top-down shot
- Layered interiors that hold interest past the first frame
- Brand mark visible without being lifted into view
- Printed cards, tissue and ribbons arranged as part of the shot
Custom Projects
Unboxing moments designed to be photographed, filmed and shared.
A PR box is packaging with a second audience: the camera. It has to survive being opened on a table by someone who has never seen the product, with the framing, the light and the reveal all working at once.
We design for that sequence — what the camera sees first, what the hands reach for, what stays in frame after the lid is off. Every layer is a shot, so every layer is specified: the lid reveal, the interior layout, the insert beneath and the printed ephemera.
The brief behind it
The difference between a PR box and a retail box is that the PR box will be opened by someone with no training, in an unpredictable space, and filmed from a phone held in one hand. Design assumptions that work in a studio fall apart in that setting.
That leads to a few hard rules. The lid should come off cleanly with one hand. Nothing should need unpacking twice — the first layer must reveal something worth showing. The brand mark should be visible after the lid is off, not hidden underneath the product.
It also changes the material logic. Highly reflective or very dark surfaces film badly under mixed lighting; matte and mid-tone woods photograph more reliably. The interior should be light enough that the product does not disappear into shadow.
What you can specify
Every point below is developed with you and confirmed on a physical sample before production.
Send the product dimensions, an approximate quantity and the date you need it. We come back with structure, material and finish options — and a clear quotation.
Start a projectAt a glance
The six decisions that define this product. Change one and the cost, weight and lead time move with it.
Why it matters
These are the choices this page decides. Getting them right at the sampling stage is what keeps cost and rework out of production.
Discuss your projectWho buys this
The same product is specified very differently depending on who is buying it. These are the briefs we see most often.
How we run it
We are a sourcing and product development partner rather than a single factory. Your project is matched to a specialist workshop in our manufacturing network, and one team stays accountable for the drawing, the sample, the production schedule and the inspection before dispatch.
Your product, sketch or reference photo becomes a working drawing: internal dimensions, wall thickness, opening mechanism and insert layout, with the trade-offs priced.
Before a full sample is made, you compare species, stain and coating on physical boards under your own lighting — the fastest way to avoid a colour surprise.
A physical sample of the actual construction is made and shipped for approval. Nothing goes into a production run before you sign off on it.
The approved sample becomes the standard. We coordinate the schedule with the workshop best suited to the structure, material and quantity, and report progress.
Units are checked against the approved sample during and after production — dimensions, finish, hardware and branding — then packed for the shipping route.
Export cartons, packing lists and shipping documents are prepared against the agreed trade term, and the shipment is coordinated with your forwarder or delivered to the named port.
Common questions
Yes. Send the items with their dimensions and we lay out a kit where each one has a defined position and nothing covers the brand mark.
Either. Some clients pack in-house to keep control of the contents; others have us assemble and ship directly to a creator list. Both are quoted.
The PR box travels inside an outer carton with corner protection. The inner kit is engineered to stay intact once opened, which is when most PR packaging is actually judged.
Matte and mid-tone surfaces with a light interior. High gloss reflects light sources and very dark wood loses detail on phone cameras.
Yes, if that matters. A tear strip or a lift-off lid with a finger notch avoids the filmed struggle with packaging that looks bad on camera.
Yes. A fixed layout with one or two interchangeable slots lets you personalise contents without redesigning the kit for every tier.
Individual addressing and a packing checklist. The layout is designed so each kit takes the same sequence to assemble, which is what keeps error rates down at volume.
Yes, if the base construction is campaign-neutral. Change the printed panel or the sleeve and the structure carries over.
Related
Weighted woods, soft-touch finishes and layered interiors for premium launches.
Read more
Campaign-ready wooden packaging produced at promotional volumes.
Read more
Executive gifting with engraving, inserts and presentation to match the occasion.
Read moreBack to the range
Send the brief — we'll come back with structure, material and finish options for pr boxes & influencer kits, plus a clear quotation.